Gorilla Waterproof Caulk & Seal 100% Silicone Sealant - 10 oz.

Gorilla waterproof caulk & seal 100% silicone sealant (as cured) seals out water, air and moisture and is great for kitchen, bath, window, doors, auto, marine, plumbing, gutters and more! Ready for water exposure in just 30 minutes, this waterproof sealant is mold & mildew resistant. The clear silicone sealant won't yellow, shrink or crack over time!

Directions

All surfaces should be clean and free of dirt, grease, oil and old sealant. Best if used above 40°F.

To open

• Cartridge - Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal
• Tube - Unscrew cap, fold and screw-on nozzle. Cut to desired bead size

To use

• Cartridge - 1) insert into cartridge gun. 2) apply sealant, pushing bead ahead of nozzle. 3) smooth bead immediately after application, before skin forms
• Tube - 1) apply sealant, pushing bead ahead of nozzle. 2) smooth bead immediately after application, before skin forms
• Storage - replace cap tightly to prevent material from curing. Store in cool, dry location. To re-use nozzle, remove sealant from nozzle once cured
• Clean-up - wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions

Features

• Seals out water, air & moisture
• 30 minute water ready
• Indoor/outdoor - all weather
• 100% waterproof
• Won’t yellow, shrink or crack
• Mold & mildew resistant
• STM c-920 movement class 35
• Great For: kitchen, bath, window, door, plumbing, gutters, auto, marine and more!

Note

Do not use on wet, damp, frozen or contaminated surfaces. Not paintable. Not for use in underwater applications, aquariums, on brick, masonry, cementitious materials or on metals sensitive to corrosion including brass & galvanized metals. For general auto/marine applications – not for under hood or direct gasoline exposure.

Specification

• Brand: Gorilla
• Product Type: Caulk & Sealant
• Size: 10 oz.
• Application Temperature : Best Above 40° F
• Service Temperature: -40° to 350° F
• Outdoor: Yes
• Moisture Resistant: Waterproof
• Paintable: No
• Sandable: No
• Stainable: No
• Cured Color: Clear
• Technical Standards: Meets ASTM C-920 Movement Class 35; Uses G, A
• Storage Tips: Store in a cool, dry location away from heat. Cartridge-store with nozzle attached. Tube-remove nozzle and replace cap tightly.
• Gap Filling - Yes use backer rod for gaps larger than 1/2"

Downloads