Newstipe’s newly improved AeroVent® 1X quickly punctures and drains single aerosol cans, reducing the cost of hazardous waste disposal by allowing the can to be recycled. It is now compliant in all 50 states, featuring a built-in cycle counter and the all new Safe2Vent™ filter with Viz-a-Ball™ check indicator that complies with EPA, OSHA and California regulations. The new improvements along with its sealed chamber design make AeroVent® 1X the safest aerosol can puncture machine and aerosol disposal system on the market.
The AeroVent® 1X Single Aerosol Can Recycling Disposal System is a single can system which allows you to quickly puncture and drain aerosol spray cans to reduce the cost of hazardous waste. The cycle counter makes the process convenient by tracking the number of cans used so you don’t have to guess when to change the filters.
The AeroVent® 1X operation is as simple as One, Two, Three:
- Just place an aerosol can in the AeroVent®1X and close the lid with the convenient handle/clamp. This automatically seals the chamber and punctures the aerosol can at the same time.
- Wait until the Safe2Vent® filter’s Viz-a-Ball stops bouncing (usually 5-30 seconds). This indicates the system has been depressurized and is safe to open
- Open the lid and remove the cans. It is that simple! Now the aerosol can may be disposed of or sold as recyclable metal.
Cycle Counter – The cycle counter makes the process convenient by eliminating the need for manual counting and guessing when to change filters. The all new Cycle Counter automatically keeps track of the number of cans processed so you can easily identify when to change filters and schedule replacements.
Versatile – Designed for the smaller waste generator, the AeroVent® 1X has a unique tray design that accepts a variety of aerosol can sizes up to 3 inch diameter and 10 inch length with just the one tray. Quick change aluminum plugs in the lid are changed for different aerosol can sizes making the AeroVent® 1X a one-size-fits-all aerosol can disposal system.
Exclusive Viz-a-Ball™ Indicator Check Valve – This revolutionary design serves two essential functions. First, it keeps the operator safe by indicating when the system is completely depressurized and can be opened. Second, the ball check valve complies with OSHA, EPA and California regulations requiring the drum to be closed and prevent vapors from escaping into the atmosphere after processing. The Safe2Vent™ is the only drum vent filter that includes this important safety feature.
Safe – The AeroVent’s® unique design makes it absolutely the safest aerosol can disposal system available. Absolute protection to the operator is achieved with a single stroke that first completely seals the chamber and punctures the can. Other systems rely on clamps and o-rings which can cause leaks and hazardous blow back into the user’s face. Drained fluids are collected in your drum for later disposal. An activated carbon filter is attached to absorb VOC’s and harmful vapors and a safety check valve seals the drum when not in use. Our non-sparking aluminum chamber with cobalt puncture tip and grounding cable minimizes the chance of fire. A Check Ball also indicates when the cycle is complete.
Fully Compliant – The AeroVent® 1X is compliant in all 50 states and conforms to OSHA, EPA and California regulations. Under EPA guidelines 40CFR 261-268, the processed aerosol cans may now be disposed of as non-hazardous waste when recycled and sold as scrap metal
Rugged – Manufactured from electrical arc welded structural steel and industrial grade components, the AeroVent® 1X Aerosol Can Disposal Machine is virtually indestructible.
Proudly made in the USA and backed by our 18 month warranty, the longest in the industry.
Does the AeroVent comply with the regulations?
Yes. As per EPA and RCRA guidelines 40CFR 261-268, the processed aerosol cans may now be disposed of as non-hazardous waste when recycled or sold as scrap metal for profit.
Are the AeroVent Systems EPA, ETV or CalCert certified?
Only one verification/certification was ever issued for aerosol can disposal equipment in 1999. It was conducted by the California Environmental Technology Certification Program which ceased operation on 2002. Likewise, the EPA’s Environmental Technology Verification Program (ETV) no longer exists. Consequently, both these certifications have not been available for many years, and any past issuances of the certifications are essentially obsolete. So the short answer is no.
More information may be found at: http://www.epa.gov/etv/index.html and http://www.calepa.ca.gov/EnviroTech/
Why are the Aerovent Systems so safe?
They are the safest systems for several reasons. First, they are the only systems available that completely enclose the aerosol can before processing and recycling. Unlike other machines, your employees are protected from premature puncturing or cans bursting. Additional safety features include anti-sparking components, electrical grounding cable and ergonomic design.
If the AeroVent X is so safe why is a respirator necessary?
The AeroVent X does seal better and is safer than other machines available. However, when the operator opens the system to add and remove cans, he may be exposed to a small amount of escaping vapors. In most cases, if correct procedures are followed, this should be insignificant.
Unfortunately, accidents can happen and we want the operator always protected as much as possible. We consider a respirator equivalent to other simple safety devices such as eye protection and hard toed work shoes. It is simple to use, inexpensive and safe. This is true when operating the Newstripe AeroVent or any other manually operated aerosol can disposal system.
The Most Important Safety Items Are:
- A trained operator following strict procedures in accordance with company policy and governmental rules and mandates.
- An open, well ventilated processing area.
- Properly installed and maintained equipment.
- Wearing the appropriate personal protective equipment.
Can unfiltered vapors escape to the atmosphere?
The AeroVent aerosol can disposal systems are completely sealed. As long as the filter is in place and the lid is closed no unfiltered vapor should escape from the drum.
What is the grounding cable for?
The grounding cable prevents any static charge from building up and possibly causing a spark.
Why is the AeroVent so fast?
Both the AeroVent 1X and 3X use the same “quick” operating principles. You simply lay the aerosol can(s) in the machine, lower the lid, and pull down the handle. Plus, the AeroVent 3X is the only system capable of processing up to three cans at once. One current high volume user processes over 2000 aerosol paint cans per eight hour shift with the AeroVent 3 system.
How long does it take to puncture and drain each aerosol can using the AeroVent?
The cycle time to puncture the cans only takes a few seconds. Then, we recommend letting them drain between 15—30 seconds depending on how much propellant and liquid was originally in the can.
What size spray cans will the AeroVent disposal systems accept?
The AeroVent systems have a unique tray design that accepts a variety of aerosol can sizes up to 3″ in diameter and 10.5″ in length with just one tray. They are the one-size fits all solution to your aerosol can disposal problem.
Why can’t I just throw unprocessed aerosol cans in the trash?
Waste aerosol cans from commercial users that are not punctured and drained are considered hazardous material and must be disposed of accordingly. This usually requires a licensed authorized waste hauler with a cost of $500 -$1,200 per drum. Punctured and drained aerosol cans can be recycled or sold as scrap metal removing the cans from the hazardous waste stream and reducing disposal costs.
What size drum can I use with the aerosol can puncturing system?
Both AeroVent systems will fit on either a standard 55 or 30 gallon drum.
How many spent aerosols can be drained into a drum?
A 55 gallon drum will hold the contents from 300-2000 aerosol cans. Obviously, this is entirely dependent on the amount of liquid originally in the cans being processed. The drums should not be filled more than 70%.
How many cans can be processed before changing the filter?
This is totally dependent on your particular type of waste stream. If the cans are completely spent and contain very little residual material, you can process hundreds of cans between filter changes. Alternately, if you process completely full cans, the filters will become saturated very quickly. In extreme cases, a different type of venting system may be required.